How to clean Washing Machine

A washing machine is a household appliance that is used to wash laundry. It typically consists of a drum or tub that is filled with water and detergent, and an agitator or impeller that agitates the water and laundry to clean the clothes. There are two main types of washing machines: top-loading and front-loading. Top-loading machines have the door on the top of the machine, while front-loading machines have the door on the front of the machine. Washing machines come in a variety of sizes and have different features such as different wash cycles, temperature settings, and spin speeds. They can also be powered by electricity or gas. Washing machines can be very helpful in making our daily life easier, but it’s important to keep them clean and maintain them regularly to ensure that it works efficiently and lasts for a long time.

To clean a washing machine, you can use the following steps:

1. Run an empty load on the hottest setting with 2 cups of white vinegar added to the detergent compartment.
2. Wipe down the exterior and interior of the machine, including the door seal, with a clean cloth and mild detergent.
3. Use a brush or toothbrush to clean the detergent compartment, dispenser tray, and any other areas that may have built-up dirt or grime.
4. Run a second empty load on the hottest setting with 2 cups of baking soda added to the drum.
5. Repeat the process every month or as needed to maintain a clean washing machine.

Note: Before starting the cleaning process, make sure to check the user manual for any specific cleaning instructions for your washing machine.

Bleach or Vinegar is better to clean a washing machine

Both bleach and vinegar can be used to clean a washing machine, but they have different properties and should be used in different ways.

• Bleach is a powerful disinfectant and can be used to kill bacteria and other germs that may be present in the washing machine. However, it should be used with caution as it can be harmful if used in large quantities or if it comes into contact with certain materials.
• Vinegar is a mildly acidic solution that can be used to remove mineral buildup, soap scum, and other types of grime. It is also a natural deodorizer and can be used to remove musty odors from the machine. It is considered a safe cleaning product with no toxicity and no bad smell.

So, depending on the type of cleaning you want to do and your personal preference you can choose between using bleach or vinegar. It’s recommended to use vinegar first, and if you see that you need a more powerful cleaning solution you can use bleach.

Clean the controls and dispenser

To clean the controls and dispenser of a washing machine, you can use the following steps:

1. Unplug the machine and turn off the water supply to the machine.
2. Use a damp cloth or sponge to wipe down the control panel, knobs, and buttons. Be sure to remove any dirt, grime, or stains that may have accumulated on these surfaces.
3. Use a toothbrush or small brush to clean the nooks and crannies of the control panel and dispenser. This will help to remove any dirt or grime that may have been collected in these areas.
4. Spray the control panel and dispenser with a mild detergent solution and wipe it down with a clean cloth or sponge.
5. Use a clean, dry cloth to wipe down the control panel and dispenser once more to remove any remaining traces of dirt or detergent.
6. Reconnect the machine to the water supply and plug it back in, then run a test load of laundry to ensure that everything is working properly.

Before using any cleaning products or solutions, be sure to check the user manual for your washing machine to ensure that they are safe to use on the controls and dispenser.

Dry the gasket

To dry the gasket (also known as the door seal) of a washing machine, you can use the following steps:

1. Unplug the machine and turn off the water supply.
2. Open the door of the machine and wipe down the gasket with a clean, dry cloth or sponge. Be sure to remove any dirt, grime, or stains that may have accumulated on the gasket.
3. Use a toothbrush or small brush to clean the gasket thoroughly, paying special attention to the crevices and folds. This will help to remove any dirt or grime that may have been collected in these areas.
4. Use a damp cloth or sponge to wipe down the gasket once more, making sure to remove any remaining traces of dirt or grime.
5. Use a clean, dry cloth to dry the gasket thoroughly.
6. Leave the door open for some minutes to let the gasket dry completely.
7. Reconnect the machine to the water supply and plug it back in, then run a test load of laundry to ensure that everything is working properly.

It’s important to keep the gasket clean and dry to prevent the buildup of mold or mildew, which can cause unpleasant odors and potential health hazards.